Centrifugal Blowers - Single Inlet

VBM Enterprises supplies Centrifugal Blowers - Single Inlet. VBM Enterprises offers External Rotor Motors, Axial Flow Fans, Centrifugal Blowers, etc. The Centrifugal Blowers - Single Inlet normally use forward curved impellers made of galvanized steel, which are press fitted on the rotor of the external rotor motor, making the unit compact. Single inlet signifies that the air is drawn from one side of the blower only. The Rotor with impeller is dynamically balanced in two planes, for vibration free running during its entire life. The assembly of the motor and impeller is essentially mounted in a technically designed housing for optimum performance. The External Rotor Motor is cooled with the air stream flowing over.

Centrifugal Blowers - Single Inlet range from:

Impeller Diameter: 125 to 240 mm

Air Flow: 175 to 1200 m3/hr

Input Voltage: 110, 220, 440 V AC [50/60 Hz.]

Power Input: 20 to 350 W

The motor of the Centrifugal Blower are used with CE Mark and confirms to EN 60335-1 standards.

Applications:

Cooling AC/DC drives

Air Balloons as an advertising media

HVAC applications

Applications with relatively small air volumes with high static pressure, and low noise levels

SPECIFICATIONS

MODEL ROTOR DIAM MM MPELLER MENSIONS MM VOLTAGE V AMPS A WATTS W SPEED RPM AIR VOLUME M3/HR 1400 RPM SI 23/13314/H 92 133 230 0.2 50 1300 175 SI23/14014/H 92 140 230 0.3 70 1400 350 SI 23/16014/H 92 160 230 0.38 90 1400 450 SI 23/18014/H 92 180 230 0.45 110 1300 600 SI 44/18014/H 92 180 415 0.3 160 1350 700 SI 23/22514/H 110 225 230 0.9 225 1200 900 SI 44/22514/H 110 225 415 0.6 260 1300 950 2800 RPM SI 23/13328/H 92 133 230 0.2 45 2050 225 SI 44/13328/H 92 133 415 0.2 80 2500 300 SI 23/14028/H 92 140 230 0.32 75 2100 425 SI 44/14028/H 92 140 415 0.3 110 2300 450 SI23/15028/S3 92 150 230 0.5 100 2500 575 SI 23/16028/H 92 160 230 0.95 190 1900 600 SI44/16028/H 92 160 415 0.5 200 2200 650 SI 23/18028/H 110 180 230 1.3 300 2300 750 SI 44/18028/H 110 180 415 0.4 280 2400 800