Chemical & Wear Resistant Electrophoretic Lacquer

Product Category : Chemical Coatings

Follow Category

Key Features of Chemical & Wear Resistant Electrophoretic Lacquer

Environmentally friendly.
Low toxicity.
Low voltage water based process.
Simple low cost equipment required -low entry cost.
Long life finishes.
Superior appearance and even distribution.
Rapid processing time.
High volume production from smaller plant.
Stable process.
Cathodic process.
Beautiful colors for new designs & effects
Non polluting and Safety in use.
No fire hazard.
No water or air effluent treatment systems.
Suitable for external use even in adverse environments.
No runs, sags, windows.
Saves energy.
Occupies less factory space.
Simple to control and use
No attack on metal being coated.
Any conductive substrate can be coated.
Can replace gold, brass and other costly finishes.

Enquire now

Product Profile of Chemical & Wear Resistant Electrophoretic Lacquer

Ronuk Industries Ltd manufactures Chemical & Wear Resistant Electrophoretic Lacquer. Ronuk Industries Ltd offers wide ranges of metal cleaner, pickling chemicals, general metal finishing, conversion coatings, lacquers, strippers, antiquing chemicals, basic chemicals etc. Chemical & Wear Resistant Electrophoretic Lacquer is environmentally friendly in nature. This Electrophoretic Lacquer offers rapid processing time.

Key Features of Chemical & Wear Resistant Electrophoretic Lacquer

Environmentally friendly.
Low toxicity.
Low voltage water based process.
Simple low cost equipment required -low entry cost.
Long life finishes.
Superior appearance and even distribution.
Rapid processing time.
High volume production from smaller plant.
Stable process.
Cathodic process.
Beautiful colors for new designs & effects
Non polluting and Safety in use.
No fire hazard.
No water or air effluent treatment systems.
Suitable for external use even in adverse environments.
No runs, sags, windows.
Saves energy.
Occupies less factory space.
Simple to control and use
No attack on metal being coated.
Any conductive substrate can be coated.
Can replace gold, brass and other costly finishes.

Product Specification of Chemical & Wear Resistant Electrophoretic Lacquer

Acid Resistance: 5% H2SO4 20°C: 300 Hrs. passed 1% H2SO4 20°C: 480 Hrs. passed
Alkaline Resistance: 5% NaOH 20°C: 300 Hrs. passed 5% NaOH 20°C: 480 Hrs. passed
Corrosion Resistance: Salt spray to ASTM B117 On forged brass: 270 - 600 On forged brass (passivated): 350 - 1000 On cast brass (passivated): 200 Hrs. plus On zinc die-cast (direct) (passivated): 260 - 550 On mild steel (phospated): 300 On stainless steel (passivated): 300 - 2000 + Hrs. depending on type On aluminium (Extruded): 2000 Hrs. + (Salt spray tests are discontinued after 20 W Hrs.) On aluminium (Cast): 2000 Hrs. + (Salt spray tests are discontinued after 20 W Hrs.)
Pencil Hardness: 3 - 5 H (Dependent on cure & substrate)
Solvent Resistance: Acetone rub test: 30 - 1000 double rubs depending on type and cure
Test: QUV UVB Test (Moisture & UV): No perceptible change after 500 Hrs. in Appearance coloured or transparent ASTM 968-51 (Dip Lacquer): 2 - 5 Falling sand test (Spray Lacquer): 2 - 5 Expressed as litres of sand (Porcelain Enamel): 5.3 ANSI perspiration test A 156.2 - 1983 9.7.5: Passed (RONUCLAD H A R P - High Acid Resistance Process.)
Bending Test: 5 mm Ø passed (Bend at 180° on steel bar)
Impact Resistance Test: Passed 200 g x 2 m (steel ball drop)
Per Mil Thickness: Acrylic: 18 - 21 Silicone Polyester: 20 Acrylic Film Laminate: 21.5 Flurocarbon Film Laminate: 46