Product Profile of Dry Sand Abrasion Test Rig
Dry Sand Abrasion Test Rig uses a rubber-rimmed wheel as the bed for silica abrasive that is fed from a hopper by a nozzle between the sample and the wheel. The Test Rig runs for a set number of revolutions with automatic cut off and the wear is measured by measuring the volume of material lost through mass loss and density measurements. The Test Rig is available in a speed range of 100 - 500 rpm which is continuously variable through AC frequency inverter with helical geared motor of 1.5 Kw. Dry Sand Abrasion Test Rig is designed with 228 mm diameter wheel and requires 3 phase 440 V AC power for operation.
Dry Sand Abrasion Test Rig has the following specifications:
Abrasive - AFS 50 - 70 test sand [about 200 micron size].
Wheel speed - 100 - 500 rpm continuously variable through AC frequency inverter with helical geared motor of 1.5 Kw [3 phase].
Abrasive flow rate - 50 - 500 gms/min through precision conveyor mechanism.
Test load - 45 to 130 N.
Wheel diameter - 228 mm.
Chlorobutyl rubber hardness - A 58 to 62 on a Shore Durometer.
Power input - 440 V AC [3 phase].
