Product Profile of Faceting And Polishing Machine
Faceting and Polishing Machine base is made up of cast iron and is fixed with zinc coated steel legs and check nut to help in maintaining proper balance on virtually any surface. The Machine has ¼ hp. 1440 r.p.m. single-phase 220 volts motor that is fixed on a removable base plate and the two housings contain two separate shafts driven by the same motor but both these shafts are rotated in different directions with the help of an idler pulley. Anand Engineering Works manufactures Faceting and Polishing Machine.
Anand Engineering Works supplies a wide range of Lapidary machineries, equipment, raw materials, etc. Faceting and Polishing Machine of Product Code AEW FPK comes with faceting equipment consisting of a 3-D Block, facetor with Index wheel, collets and cheater adjustment and a table polisher. The Machine has adjustable pulleys used in tightening of the belt.
Key Features of Faceting And Polishing Machine
- The facetor can be lifted up almost 180 degrees with respect to the grinding lap. This affords a full view of the stone.
- Very sturdy base - the naked base weighs over 15 Kgs. This results in much greater stability and vibration free operation of the machine.
- The machine is fitted with 3 Angle Protractors as against one in most other machines. These three angle protractors can be used for three different pre-set angles for faceting and polishing.
- The time involved and the possibility of errors in changing the angles each time is saved.
- Each of these protractors can be locked with the help of a locking attachment to the pre-set angles.
