Product Profile of Horizontal/ Vertical Designed Thermic Fluid Heater
Horizontal/ Vertical Designed Thermic Fluid Heater is fully automatic in nature. Horizontal/ Vertical Designed Thermic Fluid Heater is available in three and four pass design. Unitherm Engineers is the manufacturer of Horizontal/ Vertical Designed Thermic Fluid Heater.
Unitherm Engineers also manufactures diverse types of fired heaters like steam boilers, thermic fluid heaters, pressurized & non pressurized hot water generators, direct fired hot air generators etc. Horizontal/ Vertical Designed Thermic Fluid Heater can obtain temperature up to 2800 C /3000 C with low operating pressures.
Horizontal/ Vertical Designed Thermic Fluid Heater has the following features:
Fully automatic operation
Three & Four Pass design, Maximum Fuel efficiency.
Multiple passes on Thermic fluid side ensure low-pressure drop across the coil, thereby making more head available for the process.
Can obtain temperature up to 2800 C /3000 C with low operating pressures.
Low System lag, rapid warm up response,
High Thermic fluid volume in the coil ensures adequate thermal storage and low heat flux.
Higher heat transfer area provided in the coil ensure low thermal stresses on the tube surface, and result in longer life of the coil as well as the Thermic oil.
Coil is made out of Boiler Quality, B.S.3059, 9 Gauge, TATA/TI make, ERW tubes for longer life and high temperature operation.
Designed with hinged doors for easy access on all sides of shell. Inspection doors are provided at strategic locations for easy inspection, Cleaning & Maintenance of Coil.
For solid fuel firing External bottom furnace with large combustion volume & high grate area is provided, which can easily burn most low-grade solid fuels like high ash Coal, lignite, Briquettes, wood, etc,
For solid fuel firing specially designed, heat resistant fire bars made from close-grained cast iron give long operational life.
Specially designed expansion & balancing tanks are provided to avoid overheating of Thermic oil and releases excess pressure & vapors and ensure longer life of Thermic fluid.
For solid fuel firing, No direct impingement of flame on to the coil due to external furnace, hence no overheating or charring of Thermic oil, thereby increasing operational life.
For solid fuel firing, by pass Chimney is provided with damper to safeguard against overheating and Charring of oil in case of power failure.
Outside the purview of I.B.R.
Completely safe operation with a number of safety features and instrumentation provided
