Product Profile of Hrc Fuse Holder System With Spin-Rivetted Carrier Contact
HRC Fuse Holder System with Spin-Rivetted Carrier Contact is used for crimping type socket or soldering socket when connecting aluminum cable. Hitech Switchgear [India] offers HRC Fuse Holder System with Spin-Rivetted Carrier Contact. Hitech Switchgear [India] supplies various types of fuse links, fuse bases, fuse fittings & switch disconnetor fuse units for protection of electrical & electronic circuit & power distribution products. HRC Fuse Holder System with Spin-Rivetted Carrier Contact is attached with carrier contact which is spin-riveted and fitted in the molding to ensure perfect alignment with the base contacts.
HRC Fuse Holder System with Spin-Rivetted Carrier Contact has the following features:
Range : FFB, FFDM, FFPO 20, 32, 63 & 100A
Aperture giving visible indication of operation of HBC fuses links in mounted position.
Carrier contact spin-rivetted and fitted in the molding to ensure perfect alignment with the base contacts.
Brass base contact block with adequate cable hole to accommodate aluminum conductors.
Advisable to use crimping type socket or soldering socket when connecting aluminum cable.
Aluminum conductors can also be directly pinched in the terminal bore of the fuse fitting by adopting the following procedure:-
The individual stand of the cable should be spread-out and cleaned with wire wool or emery paper. The cleaned surface should be coated with a thin layer of suitable oxide inhibiting grease.
The cables may be terminated using the right size of screw driver for the grub screws and tightened fully.
Over tightening of use of bigger screws driver should be avoided.
At regular intervals tightness may be checked with the right screw driver.
Should the conductors be disturbed from the terminal bore, it is desirable to remake the connections
