Opto-Mechanical Coagulation Analyzer with Automatic Adjustment

Product Specification of Opto-Mechanical Coagulation Analyzer with Automatic Adjustment

• Dilutor: 250 ml syringe, 1 distilled water tube, 1 waste water tube
• Dimensions: Width: 72 cm<br>Height: 55 cm<br>Depth: 45 cm
• Display: Alphanumeric LCD display with two lines of 20 characters each
• Interface: RS 232 C Host/ Service
• Light Source: LED`s Light Emitting Diode, Light intensity depending on turbidity of sample
• Measuring channels: 6 channels
• Measuring timer: Internal clock module possible error < 0.1 sec
• Operating mode: Batch mode (test selective)<br>Random-Access Mode<br>(Sample Oriented)
• Primary rotor: For 6 cuvette bars each, each cuvette bar contains 6 wells. <br>18 sample positions<br> 6 reagent positions R1-R6
• Printer: Built in thermal printer<br>Paper roll 57 mm wide
• Reagent positions: 6 positions for reagents, plasma and washer at room temperature
• Sampling: X-Z pipetting device to transport plasma and reagent. The pipettor is heated to 37&deg; levels of reagents and samples C. A level sensor checks the liquid
• Sensitivity: PT > 10% of standard
• software: Test menu for PT, aPTT and Fibrinogen Documentation of all test parameters Reference curves<br>Date/Time<br>Conversion into %, g/l, mg/dl, Ratio, INR Entry of all reagent specific data via Chip CARD Service program
• Test Volume: 250 (Max)
• Weight: 17