Polyamide Cured Epoxy Resin based Zinc Rich Primer

Product Profile of Polyamide Cured Epoxy Resin based Zinc Rich Primer
Polyamide Cured Epoxy Resin based Zinc Rich Primer is manufactured by Bonjour Enterprises. Bonjour Enterprises also manufactures diverse types of synthetic paints, epoxy paints, polyurethane paints, chlorinated rubber paints, N.C. Paints, decorative paints for interior & exterior, heat resistant paints and chimney paints etc. Polyamide Cured Epoxy Resin based Zinc Rich Primer provides catholic protection and also gives good resistance to under film creeping corrosion at damaged areas. This Polyamide Cured Epoxy Resin based Zinc Rich Primer is made as per IS specifications and is ideal for protection of refineries, power Plants, Petro-chemical units, Gas Plants, Fertilizer units, pen stock, sluice gates etc. Flash point of this resin based zinc rich primer is above 20 degree C.

Polyamide Cured Epoxy Resin based Zinc Rich Primer have the following specifications:
  • Colour :Grey
  • Finish :Matt
  • Flash Point :Above 20 degree C
  • Mixing Ratio :Base :Accelerator 3:1 [by volume]
  • Volume Solids :37% approximately
  • Recommended dry :25 - 50 microns per coat
  • Product Specification of Polyamide Cured Epoxy Resin based Zinc Rich Primer
    • Drying Time: 15 - 30 min (Touch dry); <br>2 Hrs (handleables); <br> 7 days (Full cure)
    • Finish: Matt
    • Flash Point: Above 20&#176;C
    • Heat Resistance: Upto 300&#176;C (Intermittent)
    • Mixing ratio: Base : Accelerator 3:1 (by volume)
    • Over Coat Interval: Mini. 18 hrs; Maxi. Indefinite
    • Recommended Dry Film Thickness: 25 - 50 microns per coat
    • Theoretical Spreading Rate: 14.8 to 7.4 Sq.meter per Ltr
    • Volume Solids: 37&#37; (approxi.)
    • Wet Films Thickness: 68 - 135