Product Profile of Stainless Steel Open Channel Water Control Gates
Jash Engineering Ltd offers Stainless Steel Open Channel Water Control Gates. Jash Engineering Ltd is certified under ISO 9001:2000. Stainless Steel Open Channel Water Control Gates widely used in waste water industry are mounted / fixed in between two parallel side walls of an open channel.
Key Features of Stainless Steel Open Channel Water Control Gates
- Are used to isolate flow within as well as in and out of an open channel.
- These are suitable for seating as well as unseating water head but the height of water in both cases should be less than height of shutter.
- Designed for channel application, breast wall not required.
- Suitable for flow from either direction.
- Self contained frame suitable for grouting within the side walls of the channel on two sides and grouting within the floor of channel on bottom.
- Frame comprising of HDPE shutter side guides encased in stainless steel sections.
- Shutter comprising of stainless steel shutter plate reinforced by stiffeners of same material.
- Metal to rubber sealing arrangement on three sides.
- Flush bottom closure arrangement.
- Provided with pin and knuckle type stem connecting arrangement to connect the shutter with the spindle.
- Single piece rising spindle to connect the shutter to the gate operating arrangement mounted directly on gate frame.
- Manual lift mechanism to enable a single person to operate gate with effort
- Corrosion resistant material used for increased life.
- Economical and faster erection of fully assembled gate in a single set-up.
