Product Profile of Two Pack Polyurethane Coating System
Setco Chemicals [I] Private Limited supplies Two Pack Polyurethane Coating System. Setco Chemicals [I] Private Limited offers Printing Inks, Resins, and Paints Adhesives.
Key Features of Two Pack Polyurethane Coating System
- Good gloss retention unsurpassed by any other air drying system and can be highly recommended for high U. V. conditions.
- Good resistant to Acids, Alkalis, Salt spray, solvents, lubricants and weathering properties like saline and marine atmosphere.
- Ability to produce good films at room temperature equipment to those obtained from stoving paint with major gain in energy conservation.
- Coating is more abrasion resistance with long life flexibility, impact resistance, stain resistance, scratch resistance properties.
- Easy to apply and fast drying.
- Good dielectric properties.
- In automotive Industry, particularly in the vehicle repair as it gives a more rapid hardening than other refinish paints with high gloss film with good scratch resistance properties.
- High Volume farming equipment, transportation vehicles where stoving is difficult like Buses, Trailers, Railways Coaches, Earth moving equipment and Tractors.
- In Masonry coatings where good alkali resistance and pore filling properties are required.
- Wood, Floor and Furniture coatings.
- Remove oil, grease, dirt, welding flux, mill scale, corrosion, products, oxides, loose particles by solvent cleaning or sand papering in case of metals.
- Clean and Dry surface.
- Level deformities if any by application of N. C. Putty, Polyester Putty depending upon type of substrate.
- Carry out sanding with water emery paper and polish same to a fine finish.
- Apply one coat of Primer and allow 8-12 hours of drying.
- Apply two coats of Polyurethane Paint at re-coat intervals of 8-12 hours.
