Two-Axis Distributed Interface Module Unit

Apex Precision Mechatronix Pvt. Ltd. offers Two-Axis Distributed Interface Module Unit. Apex Precision Mechatronix Pvt. Ltd. is an ISO accredited company that supplies Linear Motion Systems, Pneumatic Products, Gears, Racks & Pinions, Safety Couplings, Precision Locknuts Locking Elements, etc. The Two-Axis Distributed Interface Module Unit of model HSSI-ED2 provides a convenient and cost-effective way to interface the SPiiPlus controller with two distributed axes. With the Two-Axis Distributed Interface Module Unit performance of the distributed axes is comparable to that of the axes that are connected directly to the controller. The controller samples the remote encoders and updates the drive commands at a rate of 20 kHz, providing high-bandwidth servo control, exceptional dynamic tracking, and fast settling time. Another important advantage of this module is that the cabling between the distributed axes and the motion control product is reduced to just the single HSSI CAT 5 cable. The Two-Axis Distributed Interface Module Unit monitors the HSSI communication channel and its own integrity. If the integrity check fails, the module automatically disables the drives and turns off all the outputs. The Two-Axis Distributed Interface Module Unit front panel includes LED indicators for power, communication, drive enable, safety inputs, and each general purpose digital input and output.

Specifications of Two-Axis Distributed Interface Module Unit are:

Drive Type: For DC brush or DC brushless motors [commutated by the drive].

Torque Command: +/- 10V, differential, 14-bit DAC resolution.

Drive Enable Output: Opto-isolated, open collector/open emitter, 5V to 30V, up to 50mA.

Drive Fault Input: Opto-isolated, source/sink, 5V [+/-10%] or 24V [+/-20%], automatically detected.

Power: External 24Vdc [+/- 20%].

I/O: External 5Vdc [+/- 10%] or 24Vdc [+/- 20%], automatic detection.

LED Indicators: Power on, communication OK, drive fault, drive enable, each right and left limit, each input and output.

Maximum cable length: 20m [65` 7.4"].

Dimensions: 74mm [2.91"] X 190mm [7.48"] X 34.5mm [1.36"] [H X W X D]