Uninterrupted Power Supply System

Product Category : Power Supplies
Follow Product

Supplier : Neel Industrial Systems Pvt. Ltd.

Key Features of Uninterrupted Power Supply System
  • Easily Up gradable: KVA Rating can be upgraded or down-graded by addition / deletion of modules.
  • Computer Interface: Can communicate to the computer system in severe Power crisis & safely shut down systems without any human intervention. Remote control / Monitoring Power Quality & Data logging also possible [optional feature].
  • Battery Modularity: Battery Back-up Time can be increased even at site.
  • Programmable Battery Low: Advises level of Battery power available 5%, 25%, 50% or 75% of total Battery Capacity. This facility enables early warning of Battery discharge.
  • Auto Start/Stop: Stops automatically if an internal fault occurs or battery is discharged, to protect battery.
  • Failsafe Hybrid By pass switch: For transfer to mains & vice versa [as standard]. Reverts to inverter automatically when mains return.
  • Separate By pass input Available: In case of mains & Inverter failure, the load will be transferred to auxiliary supply, which need not be mains supply, eg DG Set.
  • Indications: UPS Status & near true RMS load Indicator.
  • Dimensions: Substantially compact dimensions with smaller foot print occupying minimum floor space.
  • Silent operation & aesthetic looks can be installed in the office premises, no separate room / enclosures required.
  • Input Voltage: 175-265 V AC[Single Phase] 340-480 V AC[Three Phase]
  • Input Frequency: 47-53 Hz
  • Output Voltage: 220/230/240 V AC
  • Output Frequency: 50 +/- 0.5 % Hz
  • Dynamic Voltage Regulation: +/- 4 %[0-100% Load]
  • Steady State Voltage Regulation: +/- 1 %
  • Wave Form: Pure Sinewave
  • Distortion: less than 3 % THD with any Single Harmonic less than 2 %
  • Overload Capacity: 150 % for 25 Seconds
  • Load Creast Factor: 1 : 3, at full load
  • Efficiency: High...86 %
  • Battery Autonomy [In Built]: 10 minutes full load, SMF Batteries
  • 25 minutes half load
  • By Pass Switch: Failsafe Hybrid Zero break
  • RFI Suppression: To AS 1044
  • Surge Protection: To IEEE587 A
  • Audible Noise: Less than 55 db, @ 1m
  • Ambient Conditions: 00 - 450 C and up to 90 % R. H.
  • Controls Audible: Warning/mimic panel
  • Software Compatibility: LAN, UNIX, XENIX, PRIME, UNISYS.
Enquire now
Product Profile of Uninterrupted Power Supply System
Neel Industrial Systems Pvt. Ltd. offers Uninterrupted Power Supply System. Neel Industrial Systems Pvt. Ltd. is an ISO 9001:2000 registered organization. The Uninterrupted Power Supply System is a device which is connected between main supply & critical load to provide clean, pure sine wave output without any interruptions during normal solutions and also during power outages.

Key Features of Uninterrupted Power Supply System
  • Easily Up gradable: KVA Rating can be upgraded or down-graded by addition / deletion of modules.
  • Computer Interface: Can communicate to the computer system in severe Power crisis & safely shut down systems without any human intervention. Remote control / Monitoring Power Quality & Data logging also possible [optional feature].
  • Battery Modularity: Battery Back-up Time can be increased even at site.
  • Programmable Battery Low: Advises level of Battery power available 5%, 25%, 50% or 75% of total Battery Capacity. This facility enables early warning of Battery discharge.
  • Auto Start/Stop: Stops automatically if an internal fault occurs or battery is discharged, to protect battery.
  • Failsafe Hybrid By pass switch: For transfer to mains & vice versa [as standard]. Reverts to inverter automatically when mains return.
  • Separate By pass input Available: In case of mains & Inverter failure, the load will be transferred to auxiliary supply, which need not be mains supply, eg DG Set.
  • Indications: UPS Status & near true RMS load Indicator.
  • Dimensions: Substantially compact dimensions with smaller foot print occupying minimum floor space.
  • Silent operation & aesthetic looks can be installed in the office premises, no separate room / enclosures required.
  • Input Voltage: 175-265 V AC[Single Phase] 340-480 V AC[Three Phase]
  • Input Frequency: 47-53 Hz
  • Output Voltage: 220/230/240 V AC
  • Output Frequency: 50 +/- 0.5 % Hz
  • Dynamic Voltage Regulation: +/- 4 %[0-100% Load]
  • Steady State Voltage Regulation: +/- 1 %
  • Wave Form: Pure Sinewave
  • Distortion: less than 3 % THD with any Single Harmonic less than 2 %
  • Overload Capacity: 150 % for 25 Seconds
  • Load Creast Factor: 1 : 3, at full load
  • Efficiency: High...86 %
  • Battery Autonomy [In Built]: 10 minutes full load, SMF Batteries
  • 25 minutes half load
  • By Pass Switch: Failsafe Hybrid Zero break
  • RFI Suppression: To AS 1044
  • Surge Protection: To IEEE587 A
  • Audible Noise: Less than 55 db, @ 1m
  • Ambient Conditions: 00 - 450 C and up to 90 % R. H.
  • Controls Audible: Warning/mimic panel
  • Software Compatibility: LAN, UNIX, XENIX, PRIME, UNISYS.
Product Specification of Uninterrupted Power Supply System
  • Ambient Conditions: 00 - 450 C and upto 90
  • Audible Noise: < 55 (At 1m)
  • Battery Autonomy: 10 (Full load), 25 (Half load)
  • Bypass Switch: Failsafe Hybrid Zero break
  • Controls Audible: Warning, mimic panel
  • Distortion: < 3 (THD), < 2 (Single harmonic)
  • Dynamic Voltage Regulation: +/- 4 (0 - 100 % Load)
  • Efficiency: High 86
  • Input Frequency Range: 47 - 53
  • Input Voltage: 175 - 265 (Single Phase), 340 - 480 (Three Phase)
  • Load Crest Factor: 1 : 3 (at full load)
  • Output frequency: Inverter mode: 50 +/- 0.5 %
  • Output Voltage: 220, 230, 240
  • Overload Capacity: 150 (for 25 S)
  • Software Compatibility: LAN, UNIX, XENIX, PRIME, UNISYS