Sm Structured Packing

Evergreen SM column packing is the sheet metal version of the p popular Everpack WM [wire mesh] and Hyflux [knitted wiremesh] packing. It is supplied in modules, which consists of parallel layers of uniquely designed embossed sheet metal strips, which corrugated and arranged vertically. These modules are then stacked with an alternating 90? orientation of every other layer, which gives a good lateral distribution of liquid and gas. The embossed metal strips help to draw the liquid in all directions into a thin film and provides a marked improvement in uniform wetting of the packing bed. With the improved internal liquid distribution, high volumetric mass transfer efficiency is achieved |d low-pressure drop is maintained. The total liquid hold-up in packing is substantially reduced. The standard packing version has specific surface area of 250 m2/m3 [Everpack SMY 0]. However, other variants with specific surface areas of 125 :/m3 [SMY 125], 175 m2/m3 [SMY 175], 350 m2/m3 [SMY 350], 0 m7m3 [SMY 500], 750 m2/m3 [SMY 750] and X crimp [60? mp alignment] are also available. In addition to the column eking, Everpack also design and manufacture high efficiency column internals [distributors, collectors, support grids, etc].